Pick the wrong refrigerant and you will not find out until the shipment arrives and the material inside it is no longer usable. Cold chain transportation for biologics is not one problem with one solution.
It is four different temperature bands, each with a refrigerant that holds it reliably and several that will not, and the band your material actually needs is a question with a specific, checkable answer, not a guess based on what shipped fine last time.
This guide maps each cold chain tier to the refrigerant built for it, including the tier most people assume dry ice handles and actually does not. It is written for the people who pack the box, not just the people who approve the budget for it: lab managers, CRO logistics staff, couriers, and the 3PLs who end up recommending a refrigerant to their own clients whether or not it is technically their call to make.
The Four Temperature Tiers That Actually Matter
Most cold chain failures trace back to a mismatch between the material’s actual storage requirement and the refrigerant chosen to transport it. The CDC’s vaccine storage and handling guidance, while written for vaccines specifically, lays out the tier boundaries that apply across biologics generally:
| Tier | Range | Typical Refrigerant |
| Refrigerated | 2°C to 8°C (36°F to 46°F) | Gel packs, phase-change packs |
| Frozen | -15°C to -50°C (5°F to -58°F) | Dry ice (lower end only) or mechanical freezer packs |
| Ultra-cold | -50°C to -90°C (-58°F to -130°F) | Dry ice |
| Vapor phase | Below -150°C | Liquid nitrogen dry shipper |
2°C to 8°C: Gel Pack Territory
This is the band most lab reagents, many diagnostics, and standard vaccines live in, and it is the easiest tier to get wrong in the other direction: packing too cold. Gel packs and phase-change packs are built to hold this narrow window, and an insulated shipper with the right pack configuration typically holds it for 24 to 72 hours depending on ambient temperature and box insulation.
Dry ice has no business anywhere near this tier. It runs more than 80 degrees colder than the bottom of this range, and packing it alongside a 2 to 8°C product is one of the more common ways shippers accidentally freeze material that was never supposed to freeze.
-15°C to -50°C: Frozen, and Still Not Automatically a Dry Ice Job
Here is the part that catches people off guard. Dry ice sublimates at roughly -78.5°C, which sits well below most of this frozen tier. The CDC toolkit is explicit that standard vaccines should not be packed in dry ice for exactly this reason: dry ice can expose material to temperatures colder than -50°C, past the bottom of a standard freezer range, and products sensitive to that overshoot can be damaged before anyone realizes what happened.
Mechanical freezer packs or phase-change media rated for this specific band are the safer default here. Dry ice becomes the right tool one tier down, not this one.
-50°C to -90°C: Where Dry Ice Earns Its Place
This is dry ice’s actual lane. At -78.5°C, solid CO2 sits comfortably inside the ultra-cold band, which makes it the standard refrigerant for biological specimens, certain reagents, and ultra-cold-stable material that genuinely needs this range rather than the shallower frozen tier above it. AdChem’s dry ice ships in pellet or rice format depending on how the package needs to pack, with container options sized for a single shipment or a standing shipping schedule.
How long a given pack of dry ice holds that temperature depends on insulation quality, ambient conditions, and transit time, which is exactly why sizing a dry ice pack to a specific shipment is worth a conversation rather than a guess, especially for couriers and logistics providers packing the same route repeatedly.
Below -150°C: Vapor-Phase Liquid Nitrogen for the Most Sensitive Material
Some biologics, particularly cell and gene therapy products, need to stay below -150°C through the entire shipment, a threshold no dry ice pack can reach. The prescribing information for at least one FDA-approved cell therapy product specifies exactly this requirement: storage at or below -150°C, delivered in a dry shipper that holds that temperature for a fixed window from the ship date before the product has to move into equivalent cold storage.
A dry shipper reaches this range by absorbing liquid nitrogen into an internal porous material, so the unit ships in vapor phase with no free liquid sloshing around, which is both a safety requirement for air transport and the reason dry shippers hold their charge for days rather than hours.
AdChem supplies the liquid nitrogen to charge a dry shipper or storage dewar you already operate. If you are scoping out a dry shipper for the first time, loop in the manufacturer on holding time and charge volume before your first scheduled ship date.
Why Getting the Tier Wrong Is More Common Than It Should Be
Most cold chain mistakes are not caused by picking the wrong refrigerant on purpose. They happen because a team defaults to whatever worked for the last shipment without checking that this shipment needs the same thing.
A lab that normally ships reagents at 2°C to 8°C, then adds a new ultra-cold-stable product to its catalog, can end up packing both in the same gel-pack configuration out of habit, which leaves the new product unprotected.
The fix is not more packaging. It is confirming the actual storage requirement on the product’s own documentation before defaulting to whatever shipper is already sitting on the shelf.
Matching Refrigerant to Shipment, Not the Other Way Around
| If Your Material Needs | Use |
| 2°C to 8°C, standard reagents and vaccines | Gel packs or phase-change packs |
| -15°C to -50°C, frozen but not ultra-cold | Mechanical freezer packs |
| -50°C to -90°C, ultra-cold specimens | Dry ice |
| Below -150°C, cell and gene therapy products | Vapor-phase liquid nitrogen dry shipper |
Building a Recurring Cold Chain Account
Couriers, 3PLs, and lab logistics teams running the same route on a schedule do not need to reorder dry ice or liquid nitrogen fresh for every shipment. A scheduled delivery account keeps the right refrigerant on hand before the next pack-out, instead of a same-day scramble each time. Request a quote with your shipment volume and temperature requirement, and AdChem can help size a recurring order around your actual schedule.
If you are still working out which tier your material falls into or want to talk through packaging before your next shipment, contact AdChem directly and the team can walk through the right refrigerant for your specific product.


